I have a projector that I was using for television and movies. It is a Toshiba, model number TDP-S20. How hard is it to change the bulb and where do I go to get a replacement. Any info will help. Thanks.How difficult is it to change the light bulb on a Projector?Depends on the projector. I've never done any work on this particular model. I mostly work with Sony projectors but.. The best way to order a bulb for this unit is to call Toshiba at 1-800-GO-TOSHIBA. Get ahold of someone in Parts or customer service. Tell them what model of projector you have and tell them you need the bulb for that unit. Good Luck! And Happy Projecting!
btw.. Ahab is right.. be careful what you touch. do not touch the new bulb or the lenses. other than that.. shouldn't be too hard. you'll need a small screwdriver. and try to remember where things go for reassembly.How difficult is it to change the light bulb on a Projector?try Ebay they have EVERYTHING!!!How difficult is it to change the light bulb on a Projector?Not too hard. Just be sure not to touch it with bare hands. The oil on your finger can cause it to overheat and burn out.How difficult is it to change the light bulb on a Projector?Read the Manual to locate the Bulb compartment, open it, unscrew the secure screw and pull out the plastic bulb assembly then replace with a new one which you can order thru Toshiba website or other dot com if you don't feel like running around for it.How difficult is it to change the light bulb on a Projector?Not too difficult with proper instructions. Here's
one place you can purchase replacement bulbs...
H a p p y
V i e w i n g !
_
_
_
