i was spoilt child, never did anything around my parents home, we had a maid to do all our work, but now im at university and im finding life tough as i got to learn to do things my self, i hve rented out an aprtment for my self. so pls can anyone tell me how do i change a light bulb, i don't want to die of electocution , im serious about this, can anyone help?How do i change a blown light bulb without electrcuting myself?very carefullyHow do i change a blown light bulb without electrcuting myself?Turn the electricity off if your worried at all. Its not hard to change a bulb, its just push lightly turn and it should just come out. Reverse for putting the new bulb in. If in doubt ask someone else to do it for you, or show you how to do it safely.How do i change a blown light bulb without electrcuting myself?turn the switch off. Righty, tighty,--lefty loosey, turn the bulb to the left as you are looking at it. counter-clockwise. Take it out and put a new one in the opposite direction.How do i change a blown light bulb without electrcuting myself?Turn the power off at the switch and twist the gobe out. Put the new one in by twisting it in GENTLY and turn the switch on %26quot;)How do i change a blown light bulb without electrcuting myself?Terrific that you are learning to be independent!
You will not electrocute yourself changing a lightbulb. Turn the light off first. Make sure that your hands are dry, your clothes are not wet, and you're not standing in a puddle. While you are changing the bulb, check the lamp shade for dust, and clean if necessary. (if it is a wall or ceiling light, there will probably be small bugs, like gnats, etc. dead in the shade. Wash with dish soap and water, dry thoroughly, then replace.) TA-DA! Lots of light! :-)How do i change a blown light bulb without electrcuting myself?Make sure that the switch to that particular outlet is turned off, and them simply unscrew the light bulb. Then put a new one in. Then you are good to go !!How do i change a blown light bulb without electrcuting myself?use rubber gloves cause electricity doesn't run through rubber.Don't be wet just turn the light bulb until it's out.Replace it with another n screw in the opposite direction you did to get out .It's easy.How do i change a blown light bulb without electrcuting myself?You wont get eletrocuted changing a lightbulb. If it's hot use a towel and unscrew the burnt out bulb and screw in a new one. If your worried turn off the light.How do i change a blown light bulb without electrcuting myself?Unplug the lamp.How do i change a blown light bulb without electrcuting myself?Why dont you get a man to fix it? your alter egos would be no good however
mr truth
w.m.d
the reporter
None of these are menHow do i change a blown light bulb without electrcuting myself?Don檛 do anything with electricity near water.
Turn off the light switch to that light fitting. If it is a lamp then unplug it at the wall.
Wait until the bulb is cool or you could use a cloth/towel to protect you from the heat of the bulb.
Unscrew the defective bulb by turning it counter clockwise.
Dust the light fitting and clean the shade.
Make sure the new bulb has the correct fitting (eg: screw in type) and watts (eg: 60 W) and size (eg: a small candle-style bulb, a normal round-style, etc). Don檛 use a bulb with too high Watts; you could cause a fire.
Insert the new bulb into the fitting and turn it gently clockwise; do not over-tighten.
Turn the switch on and congratulate yourself.
Dispose of the old bulb carefully so that if the bulb breaks no-one gets cut (including the garbage-collection person). I put the old bulb into the box from the new bulb or wrap the old bulb in junk paper before I put it in the trash.
There are lots of types of bulbs you can buy: energy-saving (and therefore saving you money), different colors, etc.
